Events

The AR&R/QUDM workshop was a resounding success with plenty of robust discussion and commentary on the two new guidelines. Some of the key outcomes from the workshop were:

1. Requests for detailed training once the AR&R Urban Chapter is released.  Stormwater Qld has also committed to investigating more detailed training and helping guide the industry in implementation.
2. An understanding that the Rational Method may still be applicable for small-scale developments combined with the 2016 IFD’s but as development size & complexity increases, so should the level of modelling.  This should be a risk-based approach with the ultimate judgement being made by an RPEQ.
3. Local authorities and consultants should note existing legislation/guidelines and changes to QUDM with regards to severe storm impact assessment and dam break analysis/emergency spillway design.
4. Local authorities and consultants should note the update of QUDM on the lawful point of discharge which is now more reflective of common law.
5. Most software is already developed to automatically include (through the Data Hub) most of the new AR&R16 changes.
6. Improvements to and feedback on the Datahub are most welcome by the custodians and should be forwarded through to allow continuous improvement and progression.
7. Further research and progress is being made on multiple components of AR&R16, particularly, refinement of the RFFE validation method.
8. AR&R Book 9 draft will be released within the week.  Comments and review are welcome by the book editors.
9. There are still many areas that remain uncertain, but the previous methods have even greater uncertainty;

Stormwater Queensland has recorded these key outcomes and actions and will provide feedback to the AR&R & QUDM editors.

As highlighted during the workshop, the link to the Hydralinc Blockage Tool – Beta version is below. You are invited to test and provide feedback to Paul directly:

http://www.hydralinc.com/stuff/

ARR2016 Blockage Tool: ARR2016 Bk6Ch6 Blockage – BETA v01.xlsx

We trust that you found the workshop worthwhile and look forward to seeing you again.

Sponsors:

Panel members

The event expert panel will comprise:

Mark Babister

Mark Babister FIEAust CPEng NER, is the Director at WMAwater and recent winner of Engineers Australia John Holland Civil Engineer of the Year 2017 award. He has also been involved in the publication of the ARR 2016, the 4th edition of ARR. 

Mark is a national leader in water engineering, specialising in flood estimation and floodplain management. He has over thirty years’ experience in water engineering studies, and has successfully led an extensive number of significant hydrologic, hydraulic, floodplain management, infrastructure and dam studies for a wide range of water managers and infrastructure owners. 

Adam Broit 

Adam is a Civil Engineer with over 10 years’ experience working on civil infrastructure projects. Adam’s core experience covers hydrology and hydraulics and has a focus on water projects. His experience ranges from stormwater network design, detailed hydrologic and hydraulic modelling, covering small cross drainage infrastructure through to large scale catchment modelling and water balance modelling.

Adam has had over 5 years’ experience working within the DA/OPW space and undertaking multiple urban stormwater management plans in South-East Queensland. He is currently working across a range of civil projects within the development and infrastructure space, ranging from overland flow path studies to flood mitigation works.
Sophia Buchanan

Sophia has 10yrs experience specialising in hydrology and hydraulics.  She has been the head training for XP Solutions and was instrumental in the implementation of ARR 2016 into Innovyze software.

Sophia has a demonstrated history of working in both the private and public sectors.  Projects undertaken by Sophia include large scale urban drainage schemes, stormwater quality and quantity modelling, flood management and detailed design for flood mitigation works.
Don Carroll

Don Carroll has over 30 years of experience in flood modelling and risk management throughout Australia and overseas. He has also worked extensively throughout South-East Asia in the areas of flood damage assessment, integrated disaster risk management, climate change adaptation, integrated basin management including institutional strengthening and flood risk vulnerability assessment. He is the author of the URBS model that is used extensively throughout Australia for flood forecasting and design incorporating the latest ARR 2016 guidelines.

Peter Coombes

Prof. Coombes has spent more than 30 years dedicated to the development of systems understanding of the urban, rural and natural water cycles with a view to finding optimum solutions for the sustainable use of ecosystem services, provision of infrastructure and urban planning.  He has been involved in a wide range of projects, advised many clients and governments, providing strategic design, policy and economic advice to the satisfaction of governments and society.  He is part of the ARR Editorial Team for Book 9 – Runoff in Urban Areas.

Alister Daly

Alister has more than 20 years’ experience in the water engineering industry throughout Australia and has worked extensively within the water resources, flooding and drainage sectors for Government and private sector clients across Australia.  Alister has held technical and management positions in both large and small consultancies in the Water Resources and Flooding sectors and has been actively involved in all levels of engineering consultancy.  He has worked extensively throughout Queensland, as well as throughout other regions throughout Australia (Victoria, Northern Territory, etc).  Alister also has international AusAID experience as a water resources advisor in China. Alister has also worked on numerous hydrologic and hydraulic assessments for development proposals, flood mitigation designs and hydraulic structure designs for both private and government clients.  Alister has also provided expert witness services in the Queensland Planning and Environment Court appeal process.

David Simpson

David is a Senior Civil and Environmental Engineer with 47 years of experience in civil, hydraulic and environmental engineering, including investigation, planning, design, construction and project management of development projects. His areas of expertise include creek stabilisation, integrated water cycle management, stormwater drainage, overland flow, water quality, water supply, sewerage, water treatment, wastewater treatment, industrial wastewater treatment, hydraulic services, subdivisions, hydro-electric schemes and expert witness services.

David has been with the Brisbane City Council for more than 20 years mainly involved with:

• Investigation, design and certification of stormwater drainage designs;
• Modelling of piped and overland flow stormwater drainage;
• Integrated water cycle management for Willawong Bus Depot;
• Design of creek stabilisation works to protect sewer crossings;
• Design and project management of Stormwater Quality Improvement Devices (SQIDs);
• Local stormwater drainage flooding investigations.

Grant Witheridge

Grant Witheridge is the principal of Catchments & Creeks Pty Ltd, and a leading authority in Hydraulics, Stormwater Management, Waterway Management, and construction site Erosion & Sediment Control.  He has over 35 years experience in the investigation, modelling and design of hydraulic structures, including 7 years at the University of NSW Water Research Laboratory.  Grant is the principal author of more than 30 technical publications including IECA Australasia’s (2008) Best Practice Erosion and Sediment Control documents, the 2007, 2013 and 2016 editions of the Queensland Urban Drainage Manual (QUDM), and publications on creek erosion, creek rehabilitation and fish passage.

Local Government Authorities (To be confirmed)

Facilitated by Adam Berry and Darren Drapper from Stormwater Queensland;

There simply will not be another event that provides a more broad, knowledgeable and passionate group of people that can deliver this type of training for this topic. It begs the question: Why would you attend training for one expert trainer when you can have ten for such an important occasion?

Discussions are currently occurring with the Stormwater Qld Committee, the panel, our members and the industry to finalise the format and topics of conversation. We envisage a format that will comprise:

• Presentations on both AR&R16 and QUDM for an overview and highlighting the major
  changes
• Your chance to shape and be heard on the much anticipated AR&R Urban Book with the lead editor Professor Peter Coombes on our panel
• A series of questions relevant to each field of the panel on both guidelines
• Open floor for questions from the audience
• A session for real examples and scenarios of challenges implementing the guidelines including:
  • Road Drainage Design.
  • Subdivision Design with basin and culvert.
  • A flood model >25 km2.
  • A large, diverse and complex flood model >2,000 km2

This session is intended to provide guidance for the industry on implementing best practice for all scenarios encountered on a daily basis.

Whether you are part of development assessment, a floodplain manager or a subdivision designer, you simply cannot miss this event! it is a fundamental occasion providing surety and direction on moving forward with these two guidelines. The event is also an excellent opportunity to network with a wide variety of professionals and converse with our panel afterwards.

Networking: 4.30pm to 6.30pm.

This includes premium beer, wine and soft drinks as well as canapes included in the price. An excellent opportunity for the industry to come together for this occasion on the outside deck overlooking the Brisbane River.

Price:
Members: $230.00 (inc. GST)
Non-Members: $450.00 (inc. GST)

This is a first class event package and also includes lunch and 2 hours of canapés and drinks and has been significantly reduced for our valued Stormwater Queensland members. Non-members are encouraged to join to gain advantage out of this event and many other high quality events planned for the year.

We look forward to seeing you there!

Time : 5:30pm registration, 6pm start, 8pm finish

Queensland has recently introduced the single use plastic bag ban and is working towards a Container Recycling Scheme later this year. This has come about from the extensive research into the impact that plastics are having on our oceans. However, aside from the vision of turtles swimming in oceans of plastic bags and dead whales with plastic filling their gut, what is the science behind the news items? Is it as big an issue as the sensational headlines make out?

Come and hear from Professor Kevin Thomas (UQ Queensland Alliance for Environmental Health Sciences (QAEHS), about the latest advancements in microplastics measurement and management challenges. Then learn from Colin Hester (Queensland Urban Utilities) on the logistics of managing a waste stream with microplastics within it.

Light refreshments & finger food included

Joint event between;

Stormwater Queensland & Engineers Australia, Queensland Division, Water Panel

Date:  Thursday 6th September, 2018

Time:  1pm – 5pm (Registration opens 12.30pm)

Location:  Hawken Auditorium, Engineering House

Flood Forecasting requires underlying systems and techniques that has applications within various parts of the water industry. While the Bureau of Meteorology is the official flood forecasting agency, they work in close co-operation with related agencies who manage emergency response and/or water resources. This requires systems that take in real-time data and provide robust and quality controlled data to decision makers. Flood forecasting systems are a rapidly advancing, highly innovative field solving unique problems.  

This event will provide a range of presenters from the industry including: 

• Seqwater (Lindsay Millard)
• Bureau of Meteorology (Sue Oates & Jonty Hall)
• Ipswich City Council (Adam Berry & Matthew Pinder)
• Water Technology (Alister Daly)

The event will highlight and showcase how some of the different forecasting systems across organisations are being used and their linkages.  You will get to see firsthand how different authorities respond to actual flood events and how they work together in Qld – it is a peek into something quite unique and exciting.  A range of different forecasting and meteorological products ranging from basic to complex will also be demonstrated within multiple flood forecasting systems. 

BoM will provide a presentation on their new, current and future products.  This presentation will include information on their HyFS [Delft-FEWS] system and a general overview on the development phase STEPS and Rainfields products and how these have been incorporated into a trial flash flood forecasting system at Ipswich City Council.   Furthermore, an insight into how an Emergency Management Response team would utilise some of this data in an actual flood event will be provided 

Seqwater will demonstrate the real-time data exchange between the modelling systems occurring between BoM’s HyFS and SeqFEWS [Delft-FEWS flood warning systems. The quality control of the rain and flow gauge datafeeds that inform the models will also be presented. 

A method in which radar rainfall is utilised by flood modellers will also be showcased in an example of how to calibrate flood events using a radar rainfall calibration approach. 

This promises to be an event full of new information, practice and innovation in an emerging and exciting space in floodplain management.

Event facilitated by Daniel Niven (Engineers Australia Water Panel and Stormwater Qld Committee Member)

Like all infrastructure, stormwater control measures (SCMs) and other Water Sensitive Urban Design (WSUD) assets require appropriate maintenance to ensure they are achieving their original purpose. It is subsequently recognised that the operation and maintenance of SCM and other WSUD assets require significant and appropriate resources to ensure their appropriate function.  However, anecdotal and published information indicates that these assets are often not being appropriately maintained and are subsequently often not achieving their design objectives.  ‘Stormwater utilities’ have been proposed as one solution to provide a stable funding source for stormwater management.

Our upcoming workshop will be a chance to describe and discuss the current status of SCM management in QLD (for both privately and publicly owned assets), and describe/ discuss the potential option for future ‘stormwater utilities’.

The format will include short presentations from an Expert Panel followed by an interactive discussion between the audience and panel.  Come along, be involved and debate the many competing issues.  A complex challenge that requires broad discussion to provide direction and lead our thinking on this critical topic – don’t miss your chance to contribute in this important area.

Confirmed Expert Panel Members include:

• Jonathon Whitcombe (Moreton Bay Regional Council)
• Andy Hornbuckle (SPEL Environmental)
• Charles Coathup (Renew Solutions)
• Stephen Turfrey (Redlands Shire Council)

Cost:

• Members and students:  $65/ person (incl. GST)
• Non-members:  $100/ person (incl. GST)

Stormwater Queensland will hold its Annual General Meeting (AGM) on;

Thursday 25 October 2018 at 1pm at AECOM, Level 8, 540 Wickham St, Fortitude Valley, QLD.

The AGM papers can be downloaded here;

• Notice of SQ 2018 AGM
• SQ Nomination Form
• SQ AGM Proxy Form

If you are not able to attend the AGM, please exercise your voting rights by returning the completed Proxy Form.

Members are invited to consider nominating for a position on the Stormwater  Queensland 2018-2019 Management Committee.  Stormwater Queensland are seeking committee members that are eager and enthusiastic to advance the stormwater industry and who want to play an active role in setting the direction of the Association and its activities. Participation on the Committee is also of personal benefit, providing professional development and networking opportunities. The nomination form is attached – please be sure to include a 100 word professional profile and statement on what you believe you can add to the committee.  Note: Nominations close Thursday, 11  October 2018 at 1pm.

If you have any questions, please don’t hesitate to contact the Stormwater Queensland Secretariat contacts.

After five years of consultation, collaboration and negotiation, Stormwater Australia released the SQIDEP document in December 2018. The document provides a uniform set of criteria to which all stormwater treatment measures (green & grey) can be field-tested and reported. These criteria should guide and inform field monitoring programs that seek to demonstrate pollutant removals for treatment measures implemented to achieve planning water quality objectives.

This SQ event will be facilitated by Sally Boer, Director, E2Designlab, and include an expanded list of speakers.  Alan Hoban, Director, Bligh Tanner, will present on the consultation process and development of the SQIDEP and future.  This will be followed by a presentation from Darren Drapper, Principal, Drapper Environmental Consultants, on the SQIDEP technical content and practical implementation.  Following these two presentations a panel of speakers will each provide a short summary of their thoughts on the SQIDEP.  The panel will comprise:  Andy Hornbuckle, SPEL Environmental; Mike Wicks, Stormwater360; Charles Kelly, Humes; Stephen Baker, Rocla; and Andew Macklin, Urban Asset Solutions.  Following the panel discussion, you’ll have an opportunity to ask your questions about this important industry benchmark.

Don’t miss this chance to be at the leading edge of this significant step-change in our industry.  Following the workshop, there will be an opportunity for networking and further informal discussions over drinks and canapés with industry colleagues.

If you are not currently a Stormwater Queensland member, apply to join today and attend this event at the dicounted member rates. Apply here

Topic: How stormwater can deliver cooler greener cities

Presenters: Kim Markwell – Associate Environmental Scientist of E2Designlab, Chris Tanner – Regional Manager of the CRC for Water Sensitive Cities & Luke McPhail – Integrated Water Management Specialist of Water Technology.

Date:  Thursday 11 June 2020

Time:  1.00pm – 1.45pm

Presentation Summary: A growing body of research is demonstrating the linkages between human health and wellbeing and creating cooler urban environments by retaining water in the landscape. This is where stormwater can play a major role in designing liveable cities.

In this webinar Kim Markwell (from E2Designlab) will investigate the drivers to consider urban cooling and demonstrate the multiple benefits which can be achieved through adopting principals of water sensitive cities. Kim will also introduce “Designing for a cool city: Guidelines for passively irrigated landscape”, the newly released national guidelines which looks at considerations for design, construction and maintenance of these systems.

Chris Tanner (from the CRC for water Sensitive Cities) will use a current case study at Norman Ck, Brisbane to showcase the use of CRCWSC tools for economic frameworks, infill development typologies, urban heat and water cycle investigations using a timeline of “Now, New and Next”.

Luke McPhail (from Watertech) will present a demonstration of the newly released Scenario Tool which brings together a range of data sets including climate, demographics and landform in an online GIS platform. Various planning scenarios can be assessed through metrics including Water Balance, Land Surface Temperature and Thermal Comfort.

Registration:  This webinar is FREE of charge to all. Follow the link below to register:

Topic: Challenges in transitioning to Sustainable Stormwater Practices: Insights from the Investigation of Stormwater Control Measures Maintenance in Melbourne

Presenters: Andrew Thomas – Vice President, Stormwater NSW

Date:  Thursday 25 June 2020

Time:  1.00pm – 2:00pm

Presentation Summary: The expansion of urban development across the globe has brought with it significant environmental impacts. Prominent amongst these impacts is the degradation of marine and freshwater environments caused by conventional approaches to stormwater management infrastructure that facilitate the rapid conveyance of untreated stormwater to waterways. Stormwater control measures (SCMs) are a sustainability innovation developed to redress these environmental impacts. However, there are growing concerns that SCMs are not receiving sufficient maintenance and that, consequently, their long-term performance may be compromised.

This study sought to gauge the veracity of these concerns and ascertain the barriers and challenges to the maintenance of SCMs. Nine local councils in Melbourne, Australia were engaged to provide condition data for their SCMs and access to their professional staff to collect perspectives on the barriers and challenges to SCM maintenance. 55 inter-dependent barriers and challenges were identified across nine sociotechnical categories, confirming SCM maintenance as a complex multi-causal sociotechnical problem, and one potentially symptomatic of a loss of momentum towards mainstream adoption. Termed Failure to Thrive, this loss of momentum is considered a function of three over-arching issues: An under-developed stormwater industry, government policy inertia and, importantly, the invisibility of SCMs in the community.

Three ‘intervention pathways’ are postulated to redress shortcomings in the maintenance of SCMs by Victorian local government and, likewise, address the Failure to Thrive scenario. An alternative transition pathway for Sustainability Transitions is proposed that accounts for the complex path-dependencies involved in the transition of sustainable innovations like SCMs and the need for pro-active institutional work accordingly to minimise the risk of partial or total failed transitions.

Registration:  This webinar is FREE of charge to all. Follow the link below to register:

Topic: A Blueprint for Improving Waterway Management

Presenter: Glenn Browning – Civil Engineer at Healthy Land and Water

Date:  Thursday 9th July 2020

Time:  1.00pm – 1.45pm

Description: Glenn’s presentation will be on the recently released SPP Review – A Blueprint for Improving Waterway Management. This is an informal document, whose purpose is to prompt discussion and interest regarding future recommended improvements to the State Planning Policy (SPP) – Water Quality State Interest. While SPP amendments are just part of the solution, complimentary recommendations have also been made to improve waterway management more broadly.
The Blueprint for Improving Waterway Management is based on foundational research by Alluvium as well as interviews with many key stakeholders in the stormwater industry. The document proposes 12 strategies across three themes: Protect, Maintain and Enhance. This paper was sponsored by the Department of Environment and Science and is for discussion purposes only. You can directly download the document here.